Ore industry requirements for lithium, antimony, antimony and antimony ore

    Since the lithium, beryllium, niobium, tantalum or the like sometimes deposits were associated with comprehensive composition, or tungsten, tin and other associated metal deposit and having a comprehensive mining and utilization value, in geological exploration process should be comprehensive evaluation.

    The industrial requirements for lithium, antimony, bismuth and antimony ore were formulated in the 1984 "Special Metal Mine Geological Exploration Regulations (Trial)", and the reference industrial indicators for lithium, antimony, antimony and antimony deposits were established (Table 1). Among them, lithium, beryllium cutoff grade and industrial grade mineral deposits are divided into stone hand and machine ores, and were determined grade index. Hand selection and machine selection ore division, according to production practice experience, if the spodumene particle size in the ore body is >3cm, the ore grade is above 2%~3%; the beryl particle size is >0.5cm, the ore grade is 0.1%. ~ 0.2% or more, suitable for hand selection, divided into hand-selected ore, and hand-selected mineral reserves calculation. Niobium, tantalum iron ore particle diameter> 0.3cm, in the mining process may be included with hand-selected. Hand-selected ore tailings are machine-selected and not suitable for hand-selected ore, all of which are machine-selected ores.

    Lithium, strontium, barium, strontium, etc. are sometimes associated with a comprehensive deposit, or associated with polymetallic deposits such as tungsten and tin, and have comprehensive mining and comprehensive utilization value. Comprehensive evaluation should be carried out in the geological exploration process. To this end, the “Indicative Industrial Indicators for Integrated Recovery of Lithium and Lanthanum” was also developed (Table 2.).

    Table 1 General industrial requirements for lithium, antimony, antimony and antimony ore (reference industrial indicators)

    General industrial requirements for lithium, antimony, antimony and antimony ore Table 2. Reference industrial indicators for integrated recovery of cesium, lithium, strontium and strontium

    Toys

    Party Drinking Toys,Plastic Indoor Toys,Wooden Indoor Toys,Adult'S Indoor Toys

    NINGBO PAPER GAMES KINGDOM CO.,LTD , https://www.papergameskingdom.com

    Previous Post: Acid leaching-precipitation-flotation process
    Next Post: 240 tons of mining trucks in China have a huge potential in the overseas market
    Home
    Recent Posts
    • Causes and preventive measures for underground e…
    • Gold sulphur urea method for gold ore beneficiat…
    • Renny Hebei Hengshui 4G explosion-proof * record…
    • China's 11 trillion market domestic parts ma…
    • How to break through the problem of continuous h…
    • ·GM shares won two quality awards
    • Geological disaster prevention regulations
    • New car supermarket 2018 listed in the first qua…
    • [Technical Analysis] Talking about non-encapsula…
    • How to determine the cyclic load in closed-circu…
    • Principle of wet permanent magnetic cylinder mag…
    • Delicate tires formally become a top Juventus pa…
    • Feng Yi Da Ke Luo bolt with you to celebrate Mid…
    • "Redwood and other precious wood heat pump …
    • Selecting a tool can improve machining center ef…
    • Kang Fen said: There are large blessings from Cu…
    • · Extension Speed ​​Auto Sales (Beijing) Co…
    • · SAIC Audi project restarts the first domestic…
    • XCMG Chu Sheng pull arm garbage truck (car body …
    • Born to the six national emission standards! Don…