There are frequent occurrences of fire during the transportation of tank trucks . There are also many accidents and economic losses caused by sudden fire of tank trucks. In order to avoid sudden fire of tank trucks, safe operation is required during transportation and fire prevention is required. . However, how can the tanker be fired in the process of transportation? Xiaobian has introduced several fire prevention measures. We can learn about it.
Tanker transport process fire prevention introduction:
1. The tanker should always be far away from the high-voltage line. If it needs to stop near the high-voltage line due to special circumstances, it must be remembered that it cannot raise or discharge fuel.
2, for the spark plug of the vehicle to be able to regularly maintain and clean, to avoid a cylinder of carbon deposition and blockage caused the cylinder can not work properly. Once the occurrence of coke clogging, avoid using the "climbing fire" method outside the tank, which is very easy to cause fire problems.
3, for the fuel filter also need regular cleaning and maintenance, but can not use gas-fired ceramic filter this method to maintain the fuel filter, this method may not be a little careful there may be a fire risk
4, many tankers will be installed to drag the subway chain, drag the subway chain should not be grounded around the frame, otherwise it is prone to static electricity and lead to flashover problems.
5, when the tanker is loaded near the oil depot, if you want to check the internal battery power situation, using the short-circuit fire is not recommended, once you use this method, the spark may be combined with the oil molecules in the air Open fire.
6. The oil path of the car chassis should be checked regularly to ensure that it does not have any problem of gasoline drip leakage. If there is a case where the gasoline drip leaks into the exhaust pipe, a fire may occur.
How can the tanker be fired during transport? The tanker is loaded with dangerous goods. The chance of a safety accident will be relatively high. Therefore, people who drive the tanker must be careful and be careful, and wake up to 120,000 points for mental safety. Operate the tanker correctly.
40HP Tractor is belong to small tractor,4x2two-wheel drive /4x4 four-wheel drive work on flat ground.40HP Tractors are widely used in China Northeast farm land deep plowing, crop planting, cultivation, fertilization and forage mechanization and transportation of materials.40hp tractor is engouh to match with some heavy Trailer.
Tractor Technical Parameters:
Structural type
4x2two-wheel drive /4x4 four-wheel drive
Rated power(kw)
29.42
Wheelbase(mm)
1880/1920
Wheel track (mm)
Front wheel
1250-1550/1200
Rear wheel
1210-1275(adjustable)
Maximum gradability
25%
Radius of turning circle (m)
One-side braking
3.8
No breaking
3.9
Min. ground clearance(mm)
280
Dimension(mm)
3500x1560x1975/3540x1560x1975
Engine type
In-line, water, four-stroke-cycle, naturally aspirated
Cylinder numbers
4
Cylinder x stroke (mm)
100x112
CC
3.52
Rated speed(r/min)
2300
Gearbox drive
Spiral bevel gear
Braking system type
Pedal, mechanical drive
Frame type
---------
Drive type
RWD/Four-wheel drive
Steering gear type
Spherical worm and roller/Full hydraulic steering gear
Hydraulic suspension system type
Semi independent
PTO
Type
Continuous running PTO
Speed (r/min)
540/760
Shaft type--spline
φ38 rectangle spline shaft, I type, 8 tooth
40HP Tractor
40HP Tractor,Utility Middle Tractors,Cheap 40HP Tractor
ZH MACHINERY , http://www.sczhmachinery.com