Microwave Extraction Device-Lab Microwave Extraction Instrument

 
Main Technical Parameters:
1. Using PFA to paint the chamber, which is corrosion resistant and against high temperature, 
and can last for at least five years without corrosion

2. Adopting plate microwave heating technology for sample digestion; better uniformity will be 
obtained if multiple samples are digested simultaneously

3. Liquid crystal display, temperature-programmed, accurate temperature of the digestion tank, automatic
 cut-off of the microwave by over-temperature and active defense of accidental over-temperature

4. Intelligent PID for auto-control to ensure the accuracy of sample digestion time and temperature

5. Multiple active and passive safety measures: intelligent security alarm, "deflated overpressure relief" 
and "explosion-proof membrane"

6. Microwave power: 2000W; Frequency: 2450MHz

7. Using platinum resistance temperature control system for real-time display and temperature-control of thedigestion tank, temperature-control range: 0-300 ºC, monitoring accuracy: 0.1 ºC (with inspection certificate)

8. Configure precision melt pressure sensor or a non-contact inductive FM Pressure Control can show real-timedisplay and control pressure reaction tank, its control range :0.1-10MPa, precision 0.01Mpa

9. At least ten samples can be treated simultaneously (capacity ≥ 100m), and equipped with at least ten sets of microwave digestion tank assembly

10. Closed pressurized microwave digestion tank (requires patent certificate)

11. The tank using TFM (PTFE) capacity ≥ 100ml, outer tank is made of PEEK, high temperature, high pressure,resistance to acid corrosion

12. Uniform chamber design ensures simultaneous treatment of all samples, using PFA to paint the chamber, with multiple high-temperature anti-corrosion coatings, preventing the chamber from acid and solvents corrosion

13. 100ml large capacity Teflon digestion tank, the maximum pressure 10MPa, to ensure the safety of the sample fast digestion

14. Equipped with larger-power ventilation system, thus all reactions can be done continuously under a ventilated, secure, and easy-for-observation condition

15. Configuration: a microwave digestion instrument, PEEK digestion tank outer tank assembly 10 sets, TFM digestion tank tank (capacity ≥ 100ml) assembly 10 sets (including master a set), 2 sets of temperature sensors, one of the ten placed boards, manual certificate must be equipped with other accessories

Packing:



Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.


Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;


 
 
Main Technical Parameters:
1. Using PFA to paint the chamber, which is corrosion resistant and against high temperature, 
and can last for at least five years without corrosion

2. Adopting plate microwave heating technology for sample digestion; better uniformity will be 
obtained if multiple samples are digested simultaneously

3. Liquid crystal display, temperature-programmed, accurate temperature of the digestion tank, automatic
 cut-off of the microwave by over-temperature and active defense of accidental over-temperature

4. Intelligent PID for auto-control to ensure the accuracy of sample digestion time and temperature

5. Multiple active and passive safety measures: intelligent security alarm, "deflated overpressure relief" 
and "explosion-proof membrane"

6. Microwave power: 2000W; Frequency: 2450MHz

7. Using platinum resistance temperature control system for real-time display and temperature-control of thedigestion tank, temperature-control range: 0-300 ºC, monitoring accuracy: 0.1 ºC (with inspection certificate)

8. Configure precision melt pressure sensor or a non-contact inductive FM Pressure Control can show real-timedisplay and control pressure reaction tank, its control range :0.1-10MPa, precision 0.01Mpa

9. At least ten samples can be treated simultaneously (capacity ≥ 100m), and equipped with at least ten sets of microwave digestion tank assembly

10. Closed pressurized microwave digestion tank (requires patent certificate)

11. The tank using TFM (PTFE) capacity ≥ 100ml, outer tank is made of PEEK, high temperature, high pressure,resistance to acid corrosion

12. Uniform chamber design ensures simultaneous treatment of all samples, using PFA to paint the chamber, with multiple high-temperature anti-corrosion coatings, preventing the chamber from acid and solvents corrosion

13. 100ml large capacity Teflon digestion tank, the maximum pressure 10MPa, to ensure the safety of the sample fast digestion

14. Equipped with larger-power ventilation system, thus all reactions can be done continuously under a ventilated, secure, and easy-for-observation condition

15. Configuration: a microwave digestion instrument, PEEK digestion tank outer tank assembly 10 sets, TFM digestion tank tank (capacity ≥ 100ml) assembly 10 sets (including master a set), 2 sets of temperature sensors, one of the ten placed boards, manual certificate must be equipped with other accessories

Packing:



Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.


Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;


 

Trolling Motor Accessories

Trolling Motor Parts, Trolling Motor Accessories, Trolling Motor Reviews, 24 Volt Trolling Motor Wiring Diagram

Ningbo Haibo Group Co.,Ltd. , http://www.hbtrollingmotors.com