Metering Pump for Food Application

Model NO.: BT-600CA/253Yx
HS Code: 8413609090
Model NO.: BT-600CA/253Yx
HS Code: 8413609090

Flow Rate (ml/min,medium:water)
Pump head  153Yx 253Yx
Tube 14# 16# 25# 17# 18# 15# 24#  35# 36#
ID×wall 1.6×1.6 3.2×1.6 4.8×1.6 6.4×1.6 7.9×1.6 4.8×2.4 6.4×2.4 7.9×2.4 9.7×2.4
Flow rate 0.03~125 0.08~470 0.17~1120 0.3~1780 0.4~2200 0.2~900 0.3~1620 0.4~2340 0.5~3000
Note 1.Above date is measured in our laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 
 
Pump head DGX 314D
Tube 14# 16# 25# 14# 16# 25# 17# 18#
ID×wall 1.6×1.6 3.1×1.6 4.8×1.6 1.6×1.6 3.2×1.6 4.8×1.6 6.4×1.6 7.9×1.6
Flow rate 0-150 0-450 0-593 0.03-162 0.08-630 0.17-1056 0.3-1848 0.4-2280
Note 1.Above date is measured in our laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 
 
Feature
DG with multichannel, 153Yx and 253Yx pump head can be connected in series, 314D can not be connected in series
Pump head material, PPS, is strongly corrosion-resistance; Lightly color PSU can resist from chemical corrosion.
The function of pump is timing and storage, setting operation and stopping time and programming times, so as to dispense and delay shutdown conveniently.
Operation of membrane switch: starting/stopping,clockwise and counter-clockwise, up and down speed, timing and dispensing settings.
External signal controlling: foot switch, analog signal (0-5V 0-10V 4-20mA) and MODBUS general agreement.
Standard configuration: digital display driver, pump head, tubes (2 meters optional). 
Optional configuration: footswitch, spare tubes, filling needle, tube connector, and anti-floating head.

 
Specification
Display Graphic LCD display
Rotary sepeed 0.1~600rpm,cw/ccw rotation
speed adiustment Rotary switch
Function Adjusting flow rate,timing,filling
Basic functions full-speed emptying, sucking-back angle setting, flow correcting, timing, working temperature detecting.
Sucking-backangle 0~360°optional
Footswitch Identify foot switch automatically(the pump can be set as jogging or continuing condition)
Filling The pump can be set to run automatically or infrared sensor running (no container, no filling)
Size Length 304×width166×high178(mm) ,weight:4.1-5.1Kg
Working environment 0-60ºC,relative humidity85%
Power Ac220V50/60Hz (Ac110V50/60Hzoptional),54W
Pressure ≤0.2Mpa(If working time is short, the outlet pressure can get 0.27Mpa)
External control Starting/stopping,CW/CCW,speed controlling:0.5-5V/10V,4-20mA,0-10KHz;RS485communication fits with MODBUS agreement.
IP rating IP31
 
BT-300CA/153Yx/253Yx Dimension
Metering Pump for Food Application

 
BT-300CA/DGX Dimension
Metering Pump for Food Application

 

 

Flow Rate (ml/min,medium:water)
Pump head  153Yx 253Yx
Tube 14# 16# 25# 17# 18# 15# 24#  35# 36#
ID×wall 1.6×1.6 3.2×1.6 4.8×1.6 6.4×1.6 7.9×1.6 4.8×2.4 6.4×2.4 7.9×2.4 9.7×2.4
Flow rate 0.03~125 0.08~470 0.17~1120 0.3~1780 0.4~2200 0.2~900 0.3~1620 0.4~2340 0.5~3000
Note 1.Above date is measured in our laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 
 
Pump head DGX 314D
Tube 14# 16# 25# 14# 16# 25# 17# 18#
ID×wall 1.6×1.6 3.1×1.6 4.8×1.6 1.6×1.6 3.2×1.6 4.8×1.6 6.4×1.6 7.9×1.6
Flow rate 0-150 0-450 0-593 0.03-162 0.08-630 0.17-1056 0.3-1848 0.4-2280
Note 1.Above date is measured in our laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 
 
Feature
DG with multichannel, 153Yx and 253Yx pump head can be connected in series, 314D can not be connected in series
Pump head material, PPS, is strongly corrosion-resistance; Lightly color PSU can resist from chemical corrosion.
The function of pump is timing and storage, setting operation and stopping time and programming times, so as to dispense and delay shutdown conveniently.
Operation of membrane switch: starting/stopping,clockwise and counter-clockwise, up and down speed, timing and dispensing settings.
External signal controlling: foot switch, analog signal (0-5V 0-10V 4-20mA) and MODBUS general agreement.
Standard configuration: digital display driver, pump head, tubes (2 meters optional). 
Optional configuration: footswitch, spare tubes, filling needle, tube connector, and anti-floating head.

 
Specification
Display Graphic LCD display
Rotary sepeed 0.1~600rpm,cw/ccw rotation
speed adiustment Rotary switch
Function Adjusting flow rate,timing,filling
Basic functions full-speed emptying, sucking-back angle setting, flow correcting, timing, working temperature detecting.
Sucking-backangle 0~360°optional
Footswitch Identify foot switch automatically(the pump can be set as jogging or continuing condition)
Filling The pump can be set to run automatically or infrared sensor running (no container, no filling)
Size Length 304×width166×high178(mm) ,weight:4.1-5.1Kg
Working environment 0-60ºC,relative humidity85%
Power Ac220V50/60Hz (Ac110V50/60Hzoptional),54W
Pressure ≤0.2Mpa(If working time is short, the outlet pressure can get 0.27Mpa)
External control Starting/stopping,CW/CCW,speed controlling:0.5-5V/10V,4-20mA,0-10KHz;RS485communication fits with MODBUS agreement.
IP rating IP31
 
BT-300CA/153Yx/253Yx Dimension
Metering Pump for Food Application

 
BT-300CA/DGX Dimension
Metering Pump for Food Application

 

 

Timeplex` customers rely on our expert design and development services for variety of components, ranging from micro-miniature parts to large, intricate components. We can provide prototyping services to facilitate high volume orders of up to 80 million parts.


Typical RF Shields:        1pcs-Set-TOONDEEN-For-iPhone6S-Logic-Board-Motherboard-Mainboard-EMI-Shield-Cover-Metal-For-iPhone-6S.jpg_640x640          
Multi-Cavity Shields
Surface Mount Shields 
Snap In Shields
One Piece Shields










RF Shielding is used to block or reduce the electromagnetic field within a space, on a PCB Board for example. Whether you`re in need of one-piece sheet metal RF shields or a multi-cavity shield with a snap-in surface mount feature, send us your 3D CAD data and we will deliver your RF/EMI shield the way it is designed – on time, no excuses. Rapid Sheet Metal typically quotes sheet metal RF shields within 24 hours, and ships raw parts in 7 days standard.

RF-Metal Shields



More services we offer:

Besides of Metal Stamping Components, we also complete solution for OEM/ODM Products & components, offer services of deep drawing services, EMI metal shielding parts, Heat Sink , Plastic Molding products for custom, Plastic Injection Components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc. 


Precision-Stamping-Board-RF-EMI-Shield-Shielding


EMI / RFI Shielding

EMI / RFI Shielding,Metal Shielding Case Components,Metal Shielding Case,Shielding Case Components,Metal Bent Shielding Cover Case,Shielding Base

Timeplex Industrial Limited , https://www.timeplexhk.com