Wire diameter used for the knitting directly affects flow, dirt holding capacity, pressure drop and cost. Knitted wire mesh demister pad is used to separate in the most efficient manner the very fine drops carried away by a gas or steam, either at a boiling stage, vacuum evaporation or bubbling of a liquid. In fact there are two phenomena, one mechanical and one physical, but no filtration at all since the size of the held drops has no realtion with the infinitely greater size of the pore or open space. The head loss or gas passage resistance is practically imperceptible, however demisting can reach up to 99% efficiency. A demister reaches the highest efficiency when the speed of a gas or steam ranges between certain limits.
For water cooled chiller, water outlet temperature range could be 0C, -15C, -35C. If large cooling capacity, say above 300kW, we have 2 compressors design to make sure sufficient duty.
This type of water cooled chiller adopts a high-efficiency twin-screw compressor and is equipped with a high-efficiency shell-and-tube heat exchanger independently developed and manufactured, which is suitable for R22, R404A and other refrigerants. Heat recovery can be configured according to customer thermal energy requirements, applicable to pharmaceutical, chemical, electronic and other demanding places. Meanwhile, cooling duty ranges from 70kW to 2369kW with chilled water outlet temperature 5C~-35C.
Water Cooled Chiller,Water Cooled Screw Chiller,Water Cooled Centrifugal Chiller,Water Cooled Industrial Chiller
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjiema.com