Applications & Installation
TPS series self-suction pumps are a good solution for self-priming because of the particular design of the pump body which is with a small tank. It is also with peripheral impeller and gain high pressure relative and its curves are steep particularly. These pumps have a compact size and are very economical, meets the most different operating requirements such as: supply water from well, pool and so on, increase the water pressure in the pipe, garden sprinkling and clean washing.
Performance
Â
| TYPE | Output | Power | Current | Capacitor | H.max | Q.max | Size | S.Head | N.W | Package Dimention |
| Kw | HP | (A) | (uF) | (m) | (L/min) | (inch) | (m) | (kg) | L×W×H(mm) | |
| TPS80 | 0.75 | 1 | 5.5 | 20 | 65 | 46 | 1"*1" | 9 | 10.8 | 290×200×245 |
Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C
Motor
★Two-pole induction motorÂ
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.
Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: Aluminum alloy
★ Impeller: Brass / Noryl / Stainless steel.
★ Shaft :45# steel/Stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide
Notes
Pumps should be installed in a dry and covered area, protected against the weather.
 TPS80 SELF-PRIMING WATER PUMPS
Applications & Installation
TPS series self-suction pumps are a good solution for self-priming because of the particular design of the pump body which is with a small tank. It is also with peripheral impeller and gain high pressure relative and its curves are steep particularly. These pumps have a compact size and are very economical, meets the most different operating requirements such as: supply water from well, pool and so on, increase the water pressure in the pipe, garden sprinkling and clean washing.
Performance
Â
| TYPE | Output | Power | Current | Capacitor | H.max | Q.max | Size | S.Head | N.W | Package Dimention |
| Kw | HP | (A) | (uF) | (m) | (L/min) | (inch) | (m) | (kg) | L×W×H(mm) | |
| TPS80 | 0.75 | 1 | 5.5 | 20 | 65 | 46 | 1"*1" | 9 | 10.8 | 290×200×245 |
Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C
Motor
★Two-pole induction motorÂ
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.
Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: Aluminum alloy
★ Impeller: Brass / Noryl / Stainless steel.
★ Shaft :45# steel/Stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide
Notes
Pumps should be installed in a dry and covered area, protected against the weather.
Â
Wuxi Yuda Polyethylene Welder can meet ISO21307 welding standard. There is a need to examine current practice on a global scale and establish the best procedure(s) for the highest-quality, most reliable and efficient construction of PE butt fusion systems for gas and water distribution.
There are 3 following types of butt fusion welders to meet the standard ISO 21307 : 1. Single Low Pressure Fusion Jointing Welding Machines 2. Double low-pressure Fusion Welders 3. Sigle High Pressure Plastik Welding Equipment. As shown in the graphs of the various systems, the high pressure method of butt welding takes less time to make a weld than low pressure welding fusion. This is a very important factor in lowering the cost of installation, since the cycle times necessary for butt welding large diameter pipes are long. Using the high pressure poly welders means that daily productivity can be significantly increased. Here you can choose relevant SHP series high pressure hdpe welding machines from 40mm-1600mm.
High Pressure Plastic Welding Machine,Butt Fusion Welding,Fusion Welding Machine,Plastic Pipe Welding Machine
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com