Model NO.: custom made
Automatic Grade: Automatic
Condition: New
Customized: Customized
Warranty: 12 Months
Vacuum Pump: Busch, German
Trademark: HAOSHUO
Transport Package: Seaworthy Packing
Specification: customized
Origin: Jiangsu, China
HS Code: 84774090
Epoxy Resin Vacuum Casting Machine1 Main component of the machine
1.1, Resin mixing & degassing system...1 set
1.2, Hardener mixing & degassing system...1 set
1.3, Electronic scale system...1 set
1.4, Final material mixing system...1 set
1.5, Vacuum casting tank system...1 set
1.6, Heating system...4 sets
1.7, Vacuum pump system...2 sets
1.8, Pneumatic pipeline system...1 set
1.9, Cooling water pipeline system...1 set
1.10, Material feeding system...1 set
1.11, Electrical controlling system...1 set
2, Equipment technical index and parameter
2.1, Casting tank size: As per customer request
2.2, Main pump speed: 300LS
2.3, Casting tank working temperature: 70~85° C
2.4, Casting tank limiting vacuum: ≤ 30Pa
2.5, Casting tank leakage rate: ≤ 100Pa. LS
2.6, Casting tank working vacuum: 100~300Pa
2.7, Casting tank working pressure: Ordinary pressure
2.8, Adopt electronic scale & high viscosity pump for material feeding
2.9, Adopt dynamic material mixing
2.10, Adopt vacuum casting technology
2.11, Adopt industrial computer controlling & manual controlling modes. Automatic
Record material tank, casting tank, mould temperature, vacuum degree. Preset material tank
Feeding rate.
2.12, Material mixing tanks adopt electrical heating, automatic temperature control.
Casting tank adopts electrical heating plate directly heating. Each heating system has rock wool
Insulation. Casting tank equipped with stainless steel plate shield. Mixing tank equipped with
Steel plate shield. Surface temperature of the insulation is not higher than room temperature by
20° C.
3. Main elements list
| 1 | Vacuum pump |
SV-300B ZJY-300 |
2 1 |
German Leybold Shanghai Sunshine |
| 2 | Vacuum main air valve | Dn50-Dn100 | many | SNJ |
| 3 | Valve | Dn16-Dn50 | many | China Suzhou |
| 4 | Electronic scale | 0-1ton | 2 | METTLER |
| 5 | Reducer | 4KW | 3 | China Guangdong |
| 6 | Temperature controller | AI series | 6 | Xiamen Yudian |
| 7 | Vacuum transducer | ZDZ-52M | 2 | China Chengdu |
| 8 | PLC | FX series | 1 | Mitsubishi |
| 9 | Solid-state relay | Â | 4 | China Wuxi |
| 10 | Computer | 19 inch | 1 | Lenovo |
| 11 |
Heating plate Heating tube |
500W 5KW |
108 6 |
Taiwan China Wuxi |
| 12 | Main elements | 24V-380V | 1 | Schneider |
| 13 | Seal | 2410*20 | 1 | China Suzhou |
| 14 | Temperature sensor | PT-100 | 8 | China Shanghai |
| 15 | Casting tank | 2400*3000 | 1 | China Suzhou |
| 16 | Material tank | 300L | 3 | China Suzhou |
| 17 | Control Cabinet | 600*900*2000 | 1 | China Suzhou |
| 18 | Pump | DN-40 | 2 | China Zhejiang |
| 19 | Material lifter | DN-100 | 1 | China Suzhou |
 Â
Power cable has two types called round cable and flat cable, and power cable consist of conductor, insulating layer, protective layer, barrier layer and armored layer. Power cable has different specification according to different efficiency of motor and different condition of well. And the power cable can be divided into low temperature and high temperature depends on the anti-temperature. According to voltage, there are grade of 3kV and 6kV. And the cable can use galvanized steel, stainless steel or Monel steel to avoid corrosion.
Power Cable
Power Cable,Electric Petroleum Submerged Pump Unit,Control Cabinet,Separator And Inducer
Tianjin RongHeng Group LLC , https://www.wholesale-water-pump.com