If you are familiar mineral processing equipment so friends will know for sure in which mineral processing equipment belongs to the most important classifier and classifier will often appear in some failures.
What are the faults in the mineral processing equipment classifier?
During the working process, the cracker of the classifier is cracked, broken, the bearing hole is worn away, the groove of the bearing pad is worn or worn, and the connecting screw is tripped. The repair should be carried out in time. It is proved that the crack in the lower part of the connecting rod occurs. Even when a major accident is broken, if the repair technical measures are taken properly, it can basically be resumed.
Common fault repairing method for mineral processing equipment classifier
Cracks or breaks of the grader linkages generally appear in the lower part. The specific repair methods often use two types: direct welding and reinforcing steel plate welding. The direct welding method is simple, suitable for medium, small, short and shallow cracks. It is more troublesome to weld steel plates, but the effect is reliable and suitable for large, long, deep cracks and breaks.
The assembly of the main parts of the classifier is very good and has a great relationship with the normal operation of the equipment. When the classifier is assembled, it should be assembled with pre-assembled parts. Assembly sequence; first install the flat lining on the two side walls of the classifier, move the shovel, lower the connecting rod, install the eccentric shaft, connecting rod, thrust plate, tie rod, safety shield and safety device, and crush the idling and load operation. The machine is adjusted and tested. The disassembly work should be carried out in the reverse order.
The ISO16028 interchange Quick Coupling is flat face connect coupling, is specifically designed for these applications where quick and easy connections and no-spill performance are essential. This series is ideal for use when glogal interchangeability with other manufacturers is important. The connection method of the nipple and the socket is push-to-connect. The coupling have color identification rings that is available to help prevent crossing of lines.
ISO16028 Series Quick Coupling
Quick Release Coupling,Quick Disconnect Coupling,Quick Disconnect Connectors,Iso16028 Series Quick Couplings
XINXIANG PINGYUAN AVIATION HYDRAULIC EQUIPMENTS CO.,LTD , https://www.coupling.pl