2 Open the touch screen software to calibrate it.
3 Loosen the screws on the back of the LCD screen, which may be caused by the tightness of the top of the touch screen.
4 Replace the touch screen data cable USB port with a U port, which may result from insufficient power supply or damage of a U port.
5 There is a problem with the touch screen driver and reinstall the driver.
Touch Screen Frequently Asked Questions II: Touch Screen No Responsive Process Flow 1 Check whether the touch screen control card has a green light blinking: Determine if the power supply is normal.
2 whether the calibration procedure can be opened: determine whether the control card is normal or not.
3 Change the USB port of the touch screen data cable to U port detection.
4 The touch screen driver is not installed, or the USB port does not correspond to the driver.
5 touch screen screen posted or damaged.
Motorcycle LED lights, lighting and signal mainly.Lights can be the light to illuminate the road in front of the car body, make the driver driving can be safe in the dark, light according to the light source can be mainly divided into: tungsten halogen lamp and xenon lamp, halogen lamp is through the tungsten wire, the lumens is not high, not enough brightness, consumption of electricity, life only 600 hours.Xenon lamp is by the high pressure xenon light emitting, high brightness, the service life of about 2000 hours, but the startup time 3 to 4 seconds interval distance blind area, and the safety of the owners, followed by mercury pollution environment, the eu legislation motorcycle ban the xenon lamp installation, can only be LED, and motorcycle LED has not been widespread use in China, guangzhou nine plus one after three years of technical research, and finally developed a motorcycle LED headlight, integration, easy installation, long service life, motorcycle LED lights
Led Motorcycle Light,Motorcycle Light,Motorcycle Fog Lights Led,Motorcycle Led Strobe Light
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.blcastings.com