The principle and performance of sanitation garbage truck

The principle of the sanitation garbage truck is that when the sanitation garbage truck's filling bucket is filled with garbage, the scraper is turned open, and the skateboard drives the scraper to move together, pierces into the garbage for cracking and initial compression, and the scraper forward reverses, further Compact the garbage, move the scraper up after the scraper is in place, compact the garbage and load it into the bin, and then return to the starting position. The whole mission process was actively controlled. When the garbage was continuously filled, the shovel pushed back under the effect of the extrusion force to gradually retreat, completing the bidirectional compression of the garbage and filling the entire garbage can on average. When the sanitation garbage truck unloads the garbage at the processing (or landfill) site, lift the filler and move the shovel backwards, pushing the rubbish out of the bin.
The performance of sanitation garbage trucks mainly includes the use of reinforced beam and steel plate welding to form a solid frame structure for the sanitation garbage truck. The bottom surface is a concave plane, and the side surface and the top surface are circular arc surfaces. The appearance is beautiful, the weight is light, and the force is good. It is not deformed; the shovel is composed of a steel pipe skeleton and a hinged panel. It is not only light and compact, but also can spread the waste evenly and completely clean the unloading. The filling device is mainly composed of components such as the filler shell, slide plate and scraper, and each component. The use of a beam or box-type structure with excellent strength, the structure is strong, light weight.
Sanitation garbage truck garbage is in the form of a blockade during compression loading and transportation. The junction between the bin and the filler is sealed with a special rubber seal. The front end of the bin has a recovery tank consisting of a dustbin and a rear shovel. 1.35m, with a recovery tank with a volume of 0.3m in the lower part of the filling device. The water inlet can receive the sewage that leaks due to aging or damage of the sealing strip between the waste container and the filler during the application process. There is a cylinder to control an artificially controlled drain valve to facilitate the discharge of designated local sewage. The filler cap completely conceals the filling inlet of the filler, eliminating the disturbance of the flow of traffic in the rear of the vehicle and creating a dusty and dusty appearance. It is even more aesthetically pleasing. [1]

Three Layer Extrusion Machine

Features:
PP super silent water drainage pipe extrusion line is using the 3-layer co-extrusion technology, this line has two or three extruders. The inner and outer layers of the pipe are extruded by one or two extruders, the material is modified PP, and the middle layer is extruded by another extruder and the material is a special soundproof viscoelastic material, the main ingredient of this soundproof viscoelastic material is the compound of nonorganic mineral filler, PP and thermoplastic elastomer. The controlling system of this line is Siemens PLC and this line is equipped with a HMI, the line is elegance in appearance and the line has high automation and stable performance.

Advantages:
PP super silent water drainage pipe has the good effects on sound absorption, sound proof and sound insulation. In the same circumstance, the drainage noise of this PP super silent water drainage pipe is much lower than the cast iron pipe and UPVC pipe`s. And PP super silent water
drainage pipe has the advantages of hot water resistance, anti corrosion, high strength and good flexibility.

1


Three Layer Extrusion Machine,3 Layer Extrusion Machine,Three Layer Pipe Making Machine,3 Layer Pipe Extrusion Machine

KonRun Intelligent Machinery(Ningbo) Co., Ltd. , https://www.konrunmachine.com