* Customer friendly operation
* Best exterior construction and good appearance
* Trustable highly precise metrology equipment
* High performance for electronic parts
* High quality explosion-proof motor with strong ability against power fluctuation
* Specially designed filtering systems with build-in re-cleanable filter
* With rich functions expansion like POS for smart card and bank card
* Flexible fuel application for gasoline, diesel, and kerosene etc.
* Works well in harsh conditions, like extremely cold, hot, humid, and sand-stormy environment
Optional Configuration:
Printer,IC card, ID card, communication for FMS, vapor recovery, break away,swivle, emergency stop, LED light,ect.
Technical specifications:
| Accuracy for the unit | ±0.25% |
| Flow rate | 45Â ~80L/min |
| Ambient temperature | -25ºC~ +55ºC; -40ºC ~ +50ºC |
| Relative humidity | 20% - 95% |
| Unit noise rate | < 70dB (A); |
| Inlet vacuum rate for  suction pump | >=54kPa |
| Communication | With RS 485 port, or current loop |
| Power supply |
AC 220V(  -15%~+10%),(50/60±1)Hz ; AC 380V( -15%~+10%); (50/60±1)Hz |
| Digit of sale | 7digits (decimal points can be adjusted ) |
| Digit of volume | 6digits (decimal points can be adjusted ) |
| Digit of unit price | 5digits (decimal points can be adjusted ) |
| Totalizer of sale | 0~42949672.95Â |
| Totalizer of volume | 0~42949672.95Â |
         SK52ZF111
|   Model   Model | ProdProductuct | Nozzlee | DisplayDisplay | PackagePackage(mm)(mm) | eiGross weightght | |
| SK52Z/G/QF111B | 1 | 1 | 2 | 1/side | 1080*490*2188 | 230/245/200 |
| SK52Z/G/QF212B | 1 | 2 | 4 | 2/side | 1080*490*2193 | 265/280/223 |
| SK52Z/G/QF222B | 2 | 2 | 4 | 2/side | 1080*490*2193 | 293/308/230 |
| Z: Vane  pump  G: Gear pump Q: Submersible pump | ||||||
About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.
Â
Zinc Die Casting Products are a metal forming process in which molten zinc metal is put under pressure and injected into a die.
Zinc are alloys that have high strength and hardness, outstanding corrosion resistance,full recyclability, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Zinc alloys possess high dimensional stability for complex shapes and excellent thin walls. The cost of raw material is low.
Zinc Die Casting Products are efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die casted, because the process provides very close tolerances for even complex shapes. Zinc Die Castings can also be easily plated or finished. Zinc Die Casting Products are dimensionally stable and heat resistant.
Although this alloy exhibits excellent casting characteristics, it has seen limited use by die casters. It does however possess some interesting characteristics that may be of assistance to designers. Its creep performance is rated higher than the other zinc alloys and it maintains higher strength and hardness levels after long-term aging.
The behavior of zinc alloys under stress is non-linear and time-temperature dependent on strain-rate, i.e. the ratio of stress to strain is not constant, even at low stresses, and varies with time resulting in continuous plastic flow under constant applied load. Designers of structural components should be aware of the creep limitations of zinc alloys, which do not have a single value for elastic modulus or yield strength. Yield strength (allowable stress) under sustained loading is dependent on the allowable design strain (% elongation) over the required service life. Working values for the elastic modulus and yield strength are important for design purposes. Standard engineering formulae used for calculating cross-sections of elastic materials must therefore be used with some caution.
This alloy exhibits excellent damping capacity and vibration attenuation in comparison with Aluminum Die Casting alloys.
We have professionally produced Zinc Die Casting Products nearly 7 years. The parts have a great property of high quality, high precision, reasonable competetive price. our products are very popular.
Zinc Die Casting Products
Zinc Die Casting, die casting parts, Zinc Alloy Die Casting, Zinc Casting, Hardware Parts, Valve Parts, Auto Parts
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com