High Quality Cast Steel Stop Check Valve

Description 

RODEO can offer almost full range of this series product. For easy site maintenance services
Carbon Steel Swing Check Valve with silver primer coating. Allows for a large flow rate
and little head loss/pressure drop across the valve due to the full bore design and recess
for the disc to sit in when fully open. Designed to BS 1868, flanges according to ASME/ANSI B16.5,
face to face according to ASME B16.10, testing and inspection according to API598. Ideally suited for liquid fuels, diesel and oils.

Standards      

Cast body precisely machined with no threaded holes and crevice, hence reduce crevice / thread corrosion and carefully designed to minimize pressure drop.
Stellited lapped seats for increased seat life and better performance.
High performance spring design.
Shock bumpers prevent slamming with springs and pins.
Hinge pin is part of the trim, in forged stainless steel and machined from ground bar. The hinge pin is held in position in the body with two supports. These pins can be easily removed for valve maintenance.










Production Process

Packaging & Shipping


Call our sales department at 0086-21-58392279 with any questions that you have about our valves. You may also email us.  
As a global valve manufacturer andsupplier, we are committed to the highest industry standards and client satisfaction.

Plate Flange is easy to obtain materials, easy to manufacture, low cost and widely used; however, its rigidity is poor, so it should not be used in chemical process piping system with requirements of supply and demand, inflammable, explosive and high vacuum degree, and occasions with high and extreme hazards. The sealing surface type has plane and protruding surface.

Plate Flange

Plate Flange Raised Face,Plate Flange Flat Face,Plate Flat Flange,Forged Flange

Jinan Xintai Forging Co., Ltd , https://www.xtdzflange.com