Hot water transport vehicles are mainly used to supply hot spring water to hot spring bath centers, hot water for heating stations, or thermal tank water tankers that distribute hot water to baths, bath centers, hotels, restaurants, bathhouses, and schools. The relevant information when using hot water trucks is as follows:
1. The driver of a hot water truck must be a full-time driver, and he must abide by the "Safe Operation Regulations for Motor Vehicle Drivers" during daily driving operations.
2. Hot water truck drivers must check whether the various parts of the vehicle are connected loosely before leaving the car, whether the tire pressure is normal, whether there is oil leakage, leakage of coolant, leakage, leakage, etc., and check the lubricant, coolant, system Whether the fluid, electrolyte, etc. meet the standards.
3 , the water temperature of the receiving end must ensure that the tank can be filled with water above 80 Â°C.
4. In the stage of adding water to the waterwheel, the water deliverer must observe whether the process of adding water to the water pump is steady and normal in a safe position. If any abnormality is found, immediately take emergency measures to stop the pump.
5. When the water truck adds water to the designated location, the water supplier must immediately stop the operation of the water pump and switch the power switch of the local power distribution unit to the open state.
6. When the pump stops running for more than 1 minute completely, the water supplier can confirm that the pipe has no water, and then the quick connector clamp connected to the water tank at the water end can be opened, the quick connector is completely disconnected, and the water tank water hose is retracted. car.
7. After the waterworker has checked all the valves of the waterwheel and the water tank cover are closed, and the water tank itself has no safety hazard, the driver can start the car and prepare to leave.
8. After starting the vehicle, the driver should check whether the engine, steering system, brake system, transmission system, safety devices, lights, and meters are operating normally. Before starting the vehicle, he must carefully observe the surrounding environment and drive before confirming safety.
9. Insulation water trucks are prohibited from smoking, eating, chatting, talking on the phone, fatigue driving and other activities that impede safe driving. They must not be over-speed or overloaded. The driver must concentrate and always pay attention to the conditions on the road.
10 , hot water transport vehicles should be kept at a constant speed as possible when driving, can not be hard to hit the direction or slam on the brakes to avoid the vehicle due to water inertia and traffic accidents.
5 tons hydraulic un-coiler:
Hydraulic motor drives. One single-head structure. It has a pressing arm to prevent the coil loose.
Electric uncoiling, hydraulic motor tenses the coil inner.
The max. coil inner-diameter is 508mm.
The max. coil outter-diameter is 1200mm.
The max. width of coil is 1250mm.
The max. capacity is 5 tons.
(2) Roll-Forming M/C:
Welded steel structure base, chains transmit, motor drives it. The machine include the filming device .
The roller is designed by Germany software COPRA, and has FEA analysis, which can promise the product precision.
About12 stations to form; Material of Roller: 45#, with hard chrome coated, polishing,
Voltage:380V/50Hz; Line speed: about 3.5 m/min
(3) Hydraulic pressing/ Cutting:
Stop to press, Stop to cut, Post cut .Cutting tool material: Cr12, pressing tool material:40Cr.
Tolerance of the cutting length Â±2mm.
(4) Product Rack
It is 2 parts, 6 meters total.
(5) Hydraulic System:
It offers power for the cutter.
(6) Electrical System:
It uses Siemens PLC system to control the whole line. It can measure and cut the length automatically. Frequency adjusts the speed and it has the self-control speed function.
Human-machine screen, touch screen control. The length can be set in touch screen freely and operation is simple.
The surround connecting wires adopts aviation socket or fast-speed plug.
(7) Safety barrier system
To protect the workers safely when working.
Floor Deck Roll Forming Machine Price are very Reasonable,and wo offer Floor Deck Roll Forming Machine, Floor Deck Forming Machine, Floor Deck Making Machine, Botou Roll Forming Machine,Floor tile making machine.etc
Floor Deck Roll Forming Machine
Floor Deck Roll Forming Machine, Floor Deck Forming Machine, Floor Deck Roll Forming Machine Price,Floor Deck Making Machine.
Botou Xianfa Roll Forming Machine Factory , http://www.rollformingmachinecn.com