1. The instrument uses complex current method to measure capacitance, dielectric loss and other parameters. The test results are accurate and easy to implement automated measurements.
2. The instrument adopts frequency conversion technology to eliminate 50Hz power frequency interference in the field, and it can measure reliable data even under strong electromagnetic interference environment.
3, the instrument uses a large-screen LCD display, the test process through the Chinese menu prompts are both intuitive and easy to operate.
4, the instrument is easy to operate, the measurement process controlled by the microprocessor, as long as the choice of a good measurement method, the data can be measured under the control of the microprocessor automatically.
5ã€Integrated models, including standard capacitors and high voltage power supply, facilitate field testing and reduce field wiring.
6, the instrument measurement accuracy is high, can meet the oil dielectric loss measurement requirements, so only with a standard oil cup, and a dedicated test line to achieve oil dielectric loss measurement.
7, set up CVT test function, can realize the self-excitation test of CVT, do not need external attachment, only need to measure once, C1, C2 electric capacity and tandem loss measure all.
8. The anti-wiring test adopts the ivddv technology, which eliminates the phenomenon of unstable anti-connection data in the past.
9, with anti-wiring low-voltage shielding function, in the 220kVCVT bus grounding case, the C11 can be disconnected 10kV anti-wire loss measurement 10, with high-voltage dielectric loss measurement function, can use high-voltage transformer or series resonance for more than 10kV voltage Dielectric loss test.
11, ground protection function, when the instrument is not grounded or bad ground, the instrument does not enter the normal program, does not output high pressure. Over-current protection function, the instrument will not be damaged when the sample is short-circuited or punctured.
12. Electric shock protection function, when the instrument operator accidentally touches the electric shock, the instrument will immediately cut off the high pressure to ensure the safety of the test personnel.
Cooling Type Dispersion Kneader
LINA Cooling Type Dispersion Kneader
LINA Dispersion Kneader with Cooling Function is mainly used for kneading rubber, because rubber is normally sensitive to high temperature and it is easy for rubber to generate heat in the mixing process due to friction. The main cooling method is water cooling system, which accesses water pipes in the mixing chamber and rotors to ensure a low temperature mixing environment for rubber materials. P. I. D. system is adopted in the temperature control system to ensure temperature accuracy.
Working principle of LINA Cooling Type Dispersion Mixer
The mixing chamber is made of advanced special steel, with surface treated with abrasion resistant steel, coated with hard chromium to provided excellent abrasion resistance and its service life 1-2 times longer than traditional dispersion kneaders. The mixing chamber is divided into tipping type and lifting type. Dry mechanical shaft seal is used to ensure easy maintenance and environment protection.
M-W pressing and molding mixing chamber of LN dispersion kneader is applied to ensure good abrasion resistance and even mixture of materials and optimized change of physical nature. 2-turning design is applied for leakage-proof device to largely enhance leakage proof performance, and the built-in dust collector allows for convenient and quick collection of dust.
Specifications of LINA Cooling Function Dispersion Kneader
|
LN Cooling Dispersion Kneader |
Type |
Size |
Dimension (mm) |
Weight (kg) |
|
LN-LAB TEST (LT) kneader |
0.5 |
1600*900*1900 |
800 |
|
|
1 |
1600*900*1900 |
800 |
||
|
2 |
1600*900*2000 |
900 |
||
|
3 |
1600*900*2100 |
900 |
||
|
5 |
1900*1000*2100 |
1200 |
||
|
10 |
2200*1350*2150 |
2500 |
||
|
LN-Mass Production |
15 |
2200*1350*2150 |
4000 |
|
|
20 |
2500*1450*2450 |
3800 |
||
|
25 |
2500*1500*2500 |
4500 |
||
|
35 |
3200*1900*3000 |
6500 |
||
|
55 |
3300*2000*3100 |
7800 |
||
|
75 |
3800*2300*3200 |
10800 |
||
|
110 |
4100*2300*3400 |
16500 |
Cooling Type Dispersion Kneader,Temperature Control Internal Mixer,Water Cooling Banbury Mixer
LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com