The BK-1/EX drive level switch is installed at the corresponding position on the outside of the main body of the magnetic flap level gauge as a liquid level alarm or control. The original XQ transmitter is in the form of a dry reed switch. It is a single-contact type and, of course, a small number of double contacts. BURGESS special company selection switch now, the magnetic drive cam, so that the level switch having a bistable memory (a dual-contact a normally open normally closed combination type). The switch is mounted on the main body of the magnetic flap level gauge and is in the same magnetic coupling system as the liquid level gauge, and is not in contact with the process medium.
With high temperature, explosion-proof and shock protection. There are two differences between the BK-1/EX drive level switch and the XQ transmitter. One is that the operating temperature is high and the maximum operating temperature is 320°C. Secondly, the output power is greater.
    The BK-1/EX drive level switch, also known as the BK-1/EX triple magnetic drive level switch, is mounted on the magnetic flap level gauge and is located in the same magnetic coupling system as the level gauge. The float moves up and down with the level change. When the float approaches the level switch from bottom to top, the magnetic field generated by the magnetic steel in the float is repulsive to the magnetic field generated by the magnetic steel in the level switch, and the magnetic steel in the level switch is pushed. And the connected cam swings to drive the switch action, the float continues to rise, the switch remains in this state, and when approaching the liquid level switch, the repulsion between the magnetic fields pushes the level switch to switch state and hold again, so the switch has a bistable state memory function. Products use special switches, large contact capacity, high temperature resistance, is the most practical and most reliable additional control or alarm device applied to the magnetic flap level gauge.
Technical Parameters
Switch type: cam magnetic drive switch, single pole double throw, with shock protection.
Contact form: a double contact a normally open normally closed combination type, power-driven (SPDT)
Contact capacity: 8A 220V AC. (Explosion-proof type contact capacity 24V0.5A)
Insulation resistance: ≥1.0 × 10 ¹²
Electric strength: ≥12.0MV/m
Enhanced Polycarbonate (PC) Housing
Heat resistance: Heat distortion temperature ≥150°C, long-term use at 120°C.
Anti-aging: 10 years after outdoor exposure, its strength retention rate is above 60%.
Working temperature: -25~150°C, special
After installation and insulation accessories, the process temperature can reach 150°C
Protection class: IP65
Electrical interface: M20×1.5 female thread
Explosion-proof mark: Intrinsically safe type: ExiaIICT5,
Associated equipment: GS 8000-EX isolation barrier
Wiring: communist / is the original ON OFF
The lower common/ is the original ON OFF
High temperature -25 ~ 300 °C please use stainless steel shell BK-1/EX three magnetic drive level switch
Interior Door Handle For Cadillac
Interior door handles for Cadillac
A car's interior door handle is a small lever that you pull to release the door's hook from the vehicle frame's latch. It varies depending on your vehicle make, model, or variant. Most interior car door handles are made of plastic, while some are cast metal. Further, there are designs offering a mix of both like a plastic bezel and metal lever, or vice versa.
Both materials come with different finishes, includes the usual chrome-plated, primed, smooth or textured, chrome bezel and colored lever combination, paint to match, satin chrome, and polished. In short, there is a vast selection of parts to match your old ones. The important thing is to look for the material you prefer. For example, chrome-plated parts could come either with a plastic or metal base material. You may also choose textured levers for better grip.These vehicle-specific parts are made to match the OEM part in every way except for cost and feature:
- Stock Appearance: this replacement door handle has the same dimensions and specifications as stock, and was specifically designed to look and function the same as the original interior handle on particular vehicles.
Interior Door Handle For Cadillac,Cadillac Interior Inside Door Handle,Escalade Inside Inner Door Handle,Cadillac Interior Inside Inner Door Handle
RUIAN XINGTING AUTO PARTS CO.,LTD , https://www.xingtinghandle.com