Zhejiang Longyou Tianzhou accelerates technological innovation and improves dryer quality

    According to the problems reflected by the users, Zhejiang Tianzhou Refrigeration Machinery Co., Ltd. increased capital investment, organized the research team to carry out technological innovation and improve the quality of grain dryers. From the factory drying center and user survey, the quality of the transformation has been improved in three aspects:
    Rice drying costs have fallen. Beginning on July 20 this year, Huang Weibing and Yu Xueteng, the large grain growers in Qianjiang District, dried the rice 9 furnace in the drying center of the factory, including 4 furnaces with a rated capacity of 15 tons, 1 furnace with 12 tons, and 4 furnaces with 10 tons. 92 tons of rice, total electricity consumption of 6128 degrees, 0.412.16 yuan per degree 0.72 yuan, an average of 47.96 yuan per ton, that is, 0.048 yuan per kg. The drying cost of the red rice drying center is similar. Compared with last year, the cost has dropped by 0.005 yuan per kg.
    The drying time per furnace is reduced. After drying the dryer, the drying time of rice with the same water content was greatly shortened. According to the drying center of the factory, it was dried from 30% water content to 12.5%, and it took 22-24 hours. It is 5 hours less than last year.
    The broken rice in the rice is falling. When the dried rice is sold to the grain station, the broken rice rate is within the qualified range because the drying time is reduced and the broken rice is reduced.
    The quality of rice has improved. According to the technical staff of the Red Rice Specialized Grain Cooperative Rice Processing Factory, the rice that has been dried by the heat pump type grain dryer has a low broken rice rate after being processed into rice. The inlet air temperature of the heat pump dryer is lower than that of the hot blast stove, and the moisture in the wet valley is slowly lost, which has little effect on the rice quality.

    Acid

    ShanDong DeXiang International Trade Co.,Ltd , https://www.dexiangchemical.com

    Previous Post: LED lighting market penetration rate increases market growth potential
    Next Post: The second half of the game reappeared the climax of personnel changes, and the new forces of the car opened the crazy digging mode.
    Home
    Recent Posts
    • China Factory Supplier Pet Plastic Bottle Blowin…
    • All Stainless Steel Dome Head Pop Blind Rivet
    • Vacuum Venting EPS Foam Plastic Granulator Machi…
    • Injection Universal Round Nylon Plastic Bushing …
    • M3 Flat Head Stainless Steel Torx Security Machi…
    • Waste Plastic Film PP PE Recycling Extrusion Mac…
    • 2s250-25 1 Inch Hot Water and Cold Water Stainle…
    • Ningbo Vpc Pneumatic Mechanical Air Valves
    • China Products/Supplier DIN127b Stainless Steel …
    • Dn25 Dn32 Plastic Actuator with Thread Pneumatic…
    • What is the difference between a blue card on a …
    • What is the difference between a blue card on a …
    • Pneumatic Solenoid Air Valves (MOV Mechanical Va…
    • What should the operator observe in the operatio…
    • What should the operator observe in the operatio…
    • Foreign smart street light application case
    • Sc Pneumatic Cylinder Parts Accessory Tc
    • Centrifugal Small Sand Ash Solid Slurry Pump
    • Automatic Soft Milk Ice Cream Production Line Ma…
    • Pressure Relief Valve for Wate Control (500X)