　　
1) Every 500 hours of operation, should loosen the screw plug on the sealing seat, with a syringe out of the chamber residual oil; to the sealed chamber filled with qualified 20 machine oil to half the volume of the cavity (plus the appropriate amount of oil inspection method: Run the pump, the oil does not come out to the outside); Screw tighten to prevent leakage occurs.
　　
2) If motor noise is found to increase and the temperature rise at the bearing is abnormal, check the lubrication of the motor bearing. Such as grease discoloration, dirty should be promptly replaced.
　　
3) When the sealing seat is found to have oil leakage phenomenon, you can loosen the screw plug on the sealing seat and run the oil pump. When the oil comes out and there is a taste of aviation fuel, it can be judged: the mechanical seal fails. Stop using the vertical pipe pump for quick mechanical seal replacement.
　　
4) Replace the failed mechanical seal method:
　　
(1) ready to place pump parts table (ground) and disassembly tools, do not arbitrarily put arbitrary use, so as not to damage the pump parts.
　　
(2) Check that the motor is under inspection before demolition; unscrew the fuel filler screw and suck the lubricant in the seal holder with straw.
　　
(3) Disassemble the split coupling: Unscrew the fixed hexagon socket head cap screw and gently pull half of the coupling shaft off the shaft (take care not to fall off). Unscrew the bolt and stopper of the pump shaft with a wrench, let the impeller slowly sink to the pump body, remove the other coupling and take off the pump shaft.
　　
(4) Disassembly sealing seat: Unscrew the sealing seat compression nut, gently remove the sealing seat (Note: do not break the seat rubber seal) and clean.
　　
(5) Disassembly and cleaning of the bearing seat: After the bearing seat is slightly loosened, lift off the bearing seat with the removal bolt and lift it upwards along the axis of the pump. Remove the bearings and seat with jet fuel and dry before installation Paint a little on the 20th machine oil lubrication protection.
　　
(6) Disassembly Mechanical Seal: Grasp the seal spring and lift up the pump shaft to remove it.
　　
(7) mechanical seal assembly: static and dynamic mirror coated with a layer of clean No. 20 oil; guide bearing seat cast grease, gently positioning the stationary ring into the guide chock; then on the pump shaft Put on the lubricating oil, put the moving ring part of the mechanical seal gently into the pump shaft, gently push the sealing ring by hand to be retractable (note that the anti-rotation part of the moving and stationary ring parts should be assembled in place).
　　
(8) mounted sealing seat: sealing seat installed on the first rubber seal, seal seat and then into the pump cover and pressed on the bearing, tighten the nut.
　　
(9) Install the coupling: Install the retaining ring on the motor shaft first, install half the coupling, install the stopper in the shaft end of the pump and the coupling groove, and tighten the bolt with the wrench (lift the shaft 3 ~ 5 mm and provide mechanical seal prestress); reassemble the other half of the coupling Screw on the hexagon socket screws must be tightened. Correct installation of the coupling inspection requirements: split the upper and lower coupling evenly spaced gap;
　　
(10) according to the use of key test run to check the replacement of mechanical seal is correct, the pump is operating normally.
Suzuki Android Car Dvd
Suzuki Android Car Dvd can install this suzuki car:
Suzuki Android Car Dvd have CAR DVD GPS,You can easily access different online maps such as Google map, IGO, Sygic and Waze map for free. With Google map, you can get the most accurate and up-to-date routes, live traffic data and more. Find your way around has never been faster and easier.
Suzuki Android Car Dvd Support easy-connected feature: Compatible with android smartphones and devices, the easy-connected feature enables mutual control between your smartphone and car head uni. You can simply connect and synchronize your smartphone to the uni via USB, with no additional software required.
Suzuki Android Car Dvd Compatible with steering wheel controls: skip to the next song, adjust the volume or switch another channel, all without having to take your hands off the steering whell, making your journey safe and more enjoyable.
| KD-7602 | ALTO/CELERIO 2015 -2016 |
| KD-1100 | Vitara 2015 |
| KD-7056 |
Vitara 2005-2011 |
| KD-8075 | CIAZ 2015 |
| KD-8073 |
SX4 2014 S Cross 2014 |
| KD-7058 |
SX4 2014 S Cross 2014 |
| KD-8702 |
SWIFT 2013-2016 |
| KD-7055 |
SWIFT 2011-2012 |
| KD-8072 |
SX4 2006-2012 |
Suzuki Android Car Dvd,Suzuki Touch Screen Android Car Dvd,Suzuki Android 4.2 Car Dvd,Suzuki Android 4.1 Car Dvd
SHEN ZHEN KLYDE ELECTRONICS CO., LTD ,