1. Components:
1.      Decoiler
2.      Coil sheet guiding and adjusting equipment
3.      Film covered device(optional)
4.      Main roll forming system
5.      Hydraulic pump station
6.      PLC control system
7.      Cutting device
8.      Run-out table
Â
2. Work flow:
Decoiling the sheet----sheet guilding----film covering(option)----roll forming----PLC controlling----hydraulic cutting----receiving the finished panel
Â
3. Technical Parameters:
| No. | Main parameter | |
| 1 | Suitable to process | Galvanized/Aluminum/Color steel sheet |
| 2 | Width of plate | 1250mm |
| 3 | Thickness of plate | 0.3-0.8mm |
| 4 | Rollers | High grade 45# steel, with hard chrome plating |
| 5 | Forming steps | 16 |
| 6 | Sprocket chain | 1.5 inch |
| 7 | Pump station power | 4kw |
| 8 | Shaft | 75mm, high grade 45# steel, heat treatment |
| 9 | Hydraulic oil pump | CB-E310 |
| 10 | Weight | About 5.0 tons |
| 11 | Productivity | 8-12m/min |
| 12 | Cutting head | Cr12 mould steel with quenched treatment |
| 13 | Control system | TAIDA brand PLC control |
| 14 | Voltage | 380V 3Phase 60Hz |
| 15 | Motor power | 4kw |
| 16 | Dimension | About 6.8m*1.5m*1.5m |
| 17 | Hydraulic pressure | 10-12mpa |
| 18 | Index error of length | ±1mm |
| 19 | The temperature range of working line | -35-50° |
4. Advantage of DIXIN roll forming machine
| No. | DIXIN roll forming machine |
| 1 | High grade quality |
| 2 | Reasonable price |
| 3 | High efficiency |
| 4 | Low failure rate |
| 5 | Low energy consumption |
| 6 | Free after-sale service |
| 7 | Reliable working |
| 8 | Durable |
| 9 | Wide application |
| 10 | Beautiful appearance |
| 11 | Welcomed by all over the world customers |
| 12 | Professional foreign trade team |
| 13 | Mature technician team |
| 14 | Customize special type |
Just send inquiry to me now!
6. We are your reliable partner!
We always do the best to make our machine perfect in every detail part.
Any pics or videos about machine, we can provide you.
7. Payment terms
30% T/T as the deposit when contract signed, 70% balanced before shipping.
8. Contact way
July
Tel: 0086-18831776368
Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycling.com