Small sealed garbage trucks are functionally the same as they are except that they are slightly smaller than the average sealed garbage truck in the system. Small sealed garbage trucks are mostly used for recycling and transportation of community garbage. Because of their small size, they have limited transport capacity. When using such garbage trucks, they should pay attention to the following issues, so that they can safely and efficiently transport garbage.
First, do not exceed vehicle capacity when loading garbage. Small-size sealed garbage trucks have limited capacity and are generally within 5 tons. Therefore, it is necessary to control the quantity when garbage is stored so as to avoid leakage or spillage. Many experienced garbage transport workers recommend that each transported garbage should not exceed 80% of the total capacity, leaving a certain amount of space for the car, which is conducive to the safety of transport. Especially when transporting food and kitchen waste, some of the garbage has a certain temperature, so that it is prone to bloat in the compartment. If the garbage is too full, it is prone to danger.
Second, to maintain stability during transportation, do not experience sudden braking. In the process of transporting garbage, the load of the vehicle is already very large and there is a great pressure on the chassis of the garbage truck. If the brakes are applied during the transportation, not only is the safety of the vehicle body a challenge, but also the chassis of the vehicle will have A lot of wear and impact, in addition to the vehicle's hydraulic system and automation system will also bring some wear and tear. In short, it is best to maintain a steady flow during the transportation of garbage so that it can be safely transported to a designated place.
Third, the vehicle should be regularly overhauled. The small enclosed garbage truck is a professional-use tool truck. It also causes the loss during the transportation of garbage. Therefore, the garbage truck should be regularly inspected and repaired. Including the maintenance of the vehicle's driving functions, the maintenance of the transportation garbage function, whether the car body is worn or leaked, and whether the hydraulic system can be used flexibly. Regular maintenance of the vehicle is conducive to timely detection of the vehicle's failure, timely solution to prevent problems when transporting garbage.
Name: inner and outer Shearing Machine
Category: Hardware Processing Series
1, the shear center, reel form to achieve circular shearing function.
2, using double hob cutting technology, compact structure, easy operation, press mechanism, feed system can be manual or pneumatic device.
3. The cutting of the outer or inner circle of the metal sheet is completed in one time, which greatly saves manpower and improves the efficiency.
Scope of application:
It is suitable for all kinds of metal drawing circular pieces, compound cooker cover and other metal pieces to open the inside and outside circles and metal products to cut round edges.
It is widely used in the work type wheel, pressure vessel, cooker, furnace tool, filter, pressure vessel, pressure vessel, pressure free container, iron packing bucket, end cover
The production and manufacture of the fittings, such as head, air box, fan, air conditioner compressor, centrifuge and so on.
Shearing Machine
Shearing Machine,Metal Shearing Machine,Cutting Shear Machine,Hydraulic Shearing Machine
Dongguan Rener Automation Technologies Co.,Ltd , https://www.rener-automation.com