It’s a handsome bell, but do you know what JSL gear oil is?

Gear oil mainly refers to the lubricating oil of the transmission and the rear axle. It differs from the oil in terms of conditions of use, composition and performance. Gear oil mainly plays the role of lubricating gears and bearings, preventing wear and corrosion, and helping the gear to dissipate heat.

Gear oil mainly plays the role of lubricating gears and bearings, anti-corrosion and heat dissipation.

Automotive gear oil is used in gear transmissions such as automobile steering gears, transmissions and drive axles. Due to the high surface pressure during gear transmission, the gear oil lubricates, wears, cools, dissipates, protects, rusts, washes and lowers the gears. Surface impact and noise play an important role.

What is JSL gear oil?

JSL ( JC special Lubricant) represents Jianghuai special gear lubricants. The JSL oil product development process follows the development experience of European and American oil products. Combined with Chinese working conditions and actual hardware of Jianghuai, it has passed the four stages of function verification, equipment optimization, mass production preparation and SOP. Important and key performance have been tested and verified.

Positive development process

Strict testing

What are the advantages of JSL gear oil?

Long life: free of first insurance, regular road conditions 60,000 km oil change mileage, greatly reducing non-working hours.

High efficiency: 1% increase in transmission efficiency, saving fuel and reducing consumption.

Smoother: a smoother shift and a comfortable driving experience.

More convenient: Four seasons universal, rear axle gear oil can be applied to the gearbox.

It is important to note that the JSL gear oil is different from the engine oil used in normal times and cannot be used as an engine oil. Otherwise it will cause irreversible damage to the engine!

Reading volume: Source: JAC handsome bell Author: Cold autumn

Industry Heating Element

Advantages

internal wiring: high temperature resistance, uniform heating, high thermal conductivity and difficult

cable fracture.

external wiring: high temperature resistance, uniform heating and high thermal conductivity.

1. Operating conditions: ambient temperature-20℃ ~ + 60℃, relative temperature <80%;
2. Electrical strength: cold withstand voltage AC work 1500V 50Hz lasts for 1 min without breakdown phenomenon;
3. Thermal insulation performance: AC 1000V 50Hz lasts for 1 min without breakdown phenomenon;
4. Leakage current <0.5MA; Insulation resistance> 30MΩ;

12v heating element, cartridge heater,single-point electric heating rods

Changzhou Jier Precision Machinery Manufacturing Co., Ltd. , https://www.jier-spinneret.com