Electrostatic Separator for Rutile Enrichment

    Model NO.: JXSC3212
    Energy Saving: Energy Saving
    Warranty: 1 Year
    Color: Multi Color
    Customized: Customized
    Condition: New
    Spec.: 320X1200
    Feeding Size: <2mm
    Application: Ilmenite, Rutile, Cassiterite, Tantalite Ect.
    Trademark: JXSC
    Origin: Ganzhou, China
    HS Code: 84741000
    Model NO.: JXSC3212
    Energy Saving: Energy Saving
    Warranty: 1 Year
    Color: Multi Color
    Customized: Customized
    Condition: New
    Spec.: 320X1200
    Feeding Size: <2mm
    Application: Ilmenite, Rutile, Cassiterite, Tantalite Ect.
    Trademark: JXSC
    Origin: Ganzhou, China
    HS Code: 84741000
    High tension electrostatic separator is designed for separation of titaniferous mineral sands, hard rock ilmenite and rutile, cassiterite, tantalite, wolframite, iron ore, plastics from metals in waste recycling system.
     
     High-tension electrostatic separators utilize the electrical conductivity difference between the various minerals within an ore feed. The high-tension roll electrostatic separator (HTR) utilizes a grounded roll to transport feed material through the high voltage ionizing field (corona) where particles are charged by ion bombardment. Conducting particles pass their charge to the grounded carrier electrode (roll) and are therefore free to be thrown from the roll by centrifugal and gravity forces. Non-conducting particles are pinned to the carrier electrode and are transported further around the roll periphery, where they drop from the electrode surface, either because their charge dissipates, or by mechanical means, e.g. brush and high voltage AC wiper.
     
    Throughput capacity of a high tension electrostatic separator is closely related to the roll speed, roll width, and characteristics of the feed material. For a roll with a smaller diameter, a higher rotation speed is required in order to maintain a substantial feed rate. However, at higher RPM, coarse, non-conductive particles tend to leave the roll surface too early due to the increase in centrifugal force resulting in a large portion of misplaced non-conductive particles in the conductor stream. Vice versa, under a low RPM condition, fine conductive particles do not gain enough inertia to be thrown off the roll, resulting in misplacement of the nonconductor stream. Therefore, for the treatment of particle mixtures with a range of physical characteristics, including conductivity, particle size, and density, it is necessary to adjust the roll speed and electrode positions to optimize the process.


    Model
    JXSC-3212 JXSC-3215 JXSC2G-3212 JXSC2G-3215
    Specification 320X1200 320X1500 320X1200/2 320X1500/2
    Operating Voltage 0-55kv
    Motor Power( KW)                 - Heat 12 15 15 18
                    -Rotate 2.2/1.5 2.2/1.5 2.2/2.2 3.0/3.0
    -Electro Discharge 0.09 0.1 0.15 0.18
    Feeding Size(mm) 0.1-2
    Capacity 0.6-1.4 0.8-1.6 1-2 1.2-2.5
    Dia. Of stationary electrode(mm) 30
    Dia. Of corona electrode(mm) 0.4
    No. of electrode filament 4 4 8 8
    Maximum operating electrode distance(mm) 85
    Weight(t) 0.7 0.8 1.8 2.2
    Overall size(mm) 1390X1980X1500 1390X2290X1650 1390X1980X2880 1390X2290X2880
    High tension electrostatic separator is designed for separation of titaniferous mineral sands, hard rock ilmenite and rutile, cassiterite, tantalite, wolframite, iron ore, plastics from metals in waste recycling system.
     
     High-tension electrostatic separators utilize the electrical conductivity difference between the various minerals within an ore feed. The high-tension roll electrostatic separator (HTR) utilizes a grounded roll to transport feed material through the high voltage ionizing field (corona) where particles are charged by ion bombardment. Conducting particles pass their charge to the grounded carrier electrode (roll) and are therefore free to be thrown from the roll by centrifugal and gravity forces. Non-conducting particles are pinned to the carrier electrode and are transported further around the roll periphery, where they drop from the electrode surface, either because their charge dissipates, or by mechanical means, e.g. brush and high voltage AC wiper.
     
    Throughput capacity of a high tension electrostatic separator is closely related to the roll speed, roll width, and characteristics of the feed material. For a roll with a smaller diameter, a higher rotation speed is required in order to maintain a substantial feed rate. However, at higher RPM, coarse, non-conductive particles tend to leave the roll surface too early due to the increase in centrifugal force resulting in a large portion of misplaced non-conductive particles in the conductor stream. Vice versa, under a low RPM condition, fine conductive particles do not gain enough inertia to be thrown off the roll, resulting in misplacement of the nonconductor stream. Therefore, for the treatment of particle mixtures with a range of physical characteristics, including conductivity, particle size, and density, it is necessary to adjust the roll speed and electrode positions to optimize the process.


    Model
    JXSC-3212 JXSC-3215 JXSC2G-3212 JXSC2G-3215
    Specification 320X1200 320X1500 320X1200/2 320X1500/2
    Operating Voltage 0-55kv
    Motor Power( KW)                 - Heat 12 15 15 18
                    -Rotate 2.2/1.5 2.2/1.5 2.2/2.2 3.0/3.0
    -Electro Discharge 0.09 0.1 0.15 0.18
    Feeding Size(mm) 0.1-2
    Capacity 0.6-1.4 0.8-1.6 1-2 1.2-2.5
    Dia. Of stationary electrode(mm) 30
    Dia. Of corona electrode(mm) 0.4
    No. of electrode filament 4 4 8 8
    Maximum operating electrode distance(mm) 85
    Weight(t) 0.7 0.8 1.8 2.2
    Overall size(mm) 1390X1980X1500 1390X2290X1650 1390X1980X2880 1390X2290X2880

    Polyester Powder Coating

    Our main products include:Powder Coating,Electrostatic Powder Coating,Epoxy Resin Powder Coating,Polyester Resin Powder Coating,Thermosetting Powder Paint,Solid Electrostatic Powder Coating.

    Polyester Powder Coating,Epoxy Polyester Powder Coating,Pure Polyester Powder Coating,Super Durable Polyester Powder Coating

    Longkou Guomei Decoration Material Co.,Ltd. , https://www.sdgmcoating.com

    Previous Post: Economic and Hot 6 Zones Walk Through Metal Detector for Library and Hotel.
    Next Post: Starter for Ford Bronco, Mustang, Econoline, E9sz-11002-a, F7su-11000-Ab, F7sz-11002-AA
    Home
    Recent Posts
    • Ministry of Public Security City Police and Moni…
    • Optimized adjustment of coal mill system and kil…
    • Long-term storage of construction machinery
    • Lasting Power Overlord Mobil Black Overlord Road…
    • Fully automatic robot makes operation easier
    • Exploration of Ground Source Heat Pump Heating a…
    • Anhui Heli Forklift Successfully Achieves "…
    • Talking about the connection and installation me…
    • Expanding Plastic Making Machine for Bottle
    • ·The National Federation of Industry and Commer…
    • Factory Directly Supply Good Quality Tubeless Mo…
    • Mayflay Structural Channel Angle Blasting Machin…
    • China-John-Deere-Farm-Machine-Helical-Blade-Auge…
    • Rising drug prices are the focus of recent talks…
    • A new generation of drilling fluid vibrating scr…
    • China's manufacturing industry accelerates t…
    • The rising cost of manufacturers shuffled light …
    • Application Status and Energy Saving Analysis of…
    • Luojiang pressure replacement wellhead valve tec…
    • Folding / Folded Wheel Carts Stretched Hand Trol…