The cigarette lighter is one of the oldest configurations of the car, and almost all vehicles are equipped. The emergence of cigarette lighter is to facilitate the use of smokers in the smoking, and now more and more devices through the cigarette lighter to take advantage of power, greatly facilitate our daily car. However, the cigarette lighter has the limitation of carrying capacity. While our daily car is cool, it also lays a hidden danger for the self-ignition of the car's short circuit. Today, the author talks with everyone about the need to pay attention to the use of cigarette lighter.
First, prevent cigarette lighter short circuit, card spring deformation
1, metal foreign body can lead to short circuit
When the author was riding in the car of the surrounding people, he found that the cigarette lighter of many vehicles was removed, leaving an empty hole. They are owners who do not smoke and don’t use cigarette lighters to take power. However, the cigarette lighter socket is so bare that if dropped into the metal, it may cause a short circuit and blow the fuse.
2, long-term plug easily deformed
For smokers, the cigarette lighter is very convenient, but for a long period of time, the snap spring in the cigarette lighter socket is easy to loosen, so that it is impossible to get stuck with the cigarette lighter. We can use a tweezers and other tools to reach into the jacks and carefully pull the snap springs inwards.
Second, the cigarette lighter power to avoid overload
1, onboard inverter
Many car owners now like to use cigarette lighter to take power to charge mobile devices. They often use long-distance travel to provide power for laptops and car refrigerators. (The onboard inverter is a vehicle power converter that can convert the 12V battery DC power to 220V AC, which is the same as the domestic power.) When using the inverter, the maximum power should not exceed 120W, otherwise it is easy. Overload, blow the fuse.
2, a drag N cigarette lighter socket
If you use a single-hole car charger fortunately, it will not be overloaded, if you use a drag-N porous cigarette lighter socket, it is prone to overload problems, use it to pay attention to whether the total power of the charging device is overloaded. At the same time, when buying on-car charging equipment, it is necessary to buy genuine products with well-known brands and quality-reliable products. Products with poor quality are more prone to short-circuit phenomena.
Third, how to do if the fuse blows?
If the cigarette lighter socket is not powered, it may be that the cigarette lighter's fuse is blown. In this case, we must first find the fuse box. The corresponding cigarette lighter fuse is generally in the guard plate under the steering wheel, after opening the guard plate. According to the instructions to find the corresponding cigarette lighter fuse, and then pull the fuse dedicated clip to insert the spare fuse into the blown fuse position on it.
to sum up:
The cigarette lighter is not only used by the smoker when he smokes, but it is also convenient for non-smoking owners to charge. But anything that needs to be watched as long as it's on the phone. When the cigarette lighter is in use, if it is not taken care of, it may cause overload and short circuit of the line, lightly blow the fuse, and cause the vehicle to ignite spontaneously. Therefore, we must pay attention to low overload when we take power through the cigarette lighter, so as to ensure safety.
Black Iron Wire,Annealed Iron Wire,Black Annealed Iron Wire,Annealed Black Iron Wire
ANPING COUNTY ANSHENG WIRE MESHES PRODUCT CO.,LTD. , https://www.aswiremesh.com