Diamond Mesh Machine China Supplier

Model NO.: DP 20/100
Electronics: Mitsubishi PLC Controller, Schneider
Life of The Machine: More Than 10 Years
Trademark: JIAKE
Transport Package: Wooden Pallet and Plastic Package in Container
Specification: CE
Origin: Hebei, China
HS Code: 8463300000
I. Specification
1. Through dies, two rods of wire become diamond-shape.
2. And then diamond-shape wire connects with wire inside the winding shaft.
3. Mesh width and mesh opening can be customized.
5. Application: extensively used as fences for playground and gardens, highway, railway, airport, port, etc.
II.Technical Parameter
Max. weaving width 4m
Max weaving length 20m
Mesh opening 20-100mm
Wire diameter 2-4mm
Raw material Galvanized wire, PVC Coated wire, etc.
Motor 3.8KW+1.1KW+1.1KW
Output 70 to 80 square meters per hour.
Electric system 1.Japan Mitsubishi PLC origin
2.French Schneider (Low-voltage electrical system)
Control system PLC automatic controller
Weight 1.8T
Dimension 4.2*2.2*1.7M (15CBM)
III.Advantages
1. Single mold and single wire.
2. Control box which is able to control mesh width
3. Additional shutdown device which allows operator to stop the machine conveniently, if there is something wrong with the machine. And the operator has no need to wall around to do it.
IV.Pictures
Diamond Mesh Machine China Supplier

Diamond Mesh Machine China Supplier

Diamond Mesh Machine China Supplier
Diamond Mesh Machine China Supplier
V.Commercial Terms
1. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
2. Minimum order quantity: 1 set 
3. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port,
China.
8. Installation: we could arrange our engineer install the machine in your factory.
VI. Contact Information
Diamond Mesh Machine China Supplier

 

Double Drum Road Roller

Small-sized road rollers are also called walk-behind rollers. At present, small-sized road rollers produced in China are divided into three types: walk-behind single-wheel rollers; walk-behind two-wheel rollers; and ride-on rollers. Engines are divided into diesel engines and gasoline engines

We are a real manufacturer, looking for agents all over the world

Double Drum Rollers,Double Drum Vibratory Tandem Rollers,Double Drum Road Rollers,Double Drum Road Roller Compact Machine

Shandong Davoo Machinery Co., Ltd. , https://www.davoomachinery.com