Constant Pressure Water Supplying Device Horizontal Type

Working principle
In the closed-cycle system, it is necessary to set a pressure-stabilizing expander to guarantee the stability of the system pressure. When the system pressure drops, the pressure of water chamber of pressure tank connected thereto also decreases, the volume of the gas chamber expands and the pressure is also reduced, the water pump is automatically opened to refill water till the pressure is close to the lower limit set by the control system and it stops running until it reaches the set upper pressure limit. When the water is heated in the system, the temperature rises and the volume expands, the pressure of gas chamber is extruded and the system pressure increases, the water in the system flows to the expander (or softening tank) through the safety pressure relief device until the system pressure reaches the limit value and the pressure relief stops until the system pressure decreases to the set value.

Scope of application
1. Continuous heating supply system with high temperature water:
2. Industry and civilian continuous heating system of hot water station:
3. Hot water and high temperature water circulation operating system;
4. Hot and cold water system of fan coil.

Performance characteristics
The small size pressure-stabilizing expander unit as a special technical device is able to set the expansion part and gas pressure stabilizing part separately, so that the most expansion capacity of the system can be stored in isolated expander and the volume utilization can be up to 90%, therefore, the whole volume and height is smaller, saving 50% -60% of land and facilitating the arrangement and installation of equipment and also saving the civil engineering cost of the machine room.


It is safe and simultaneous advanced automatic control system. It has double pumps for both alternating running and simultaneous running. It has functions of a low water level protection and anti-pressure instability, etc. Which could ensure sketch the safe and stable operation of the device. Working principle
In the closed-cycle system, it is necessary to set a pressure-stabilizing expander to guarantee the stability of the system pressure. When the system pressure drops, the pressure of water chamber of pressure tank connected thereto also decreases, the volume of the gas chamber expands and the pressure is also reduced, the water pump is automatically opened to refill water till the pressure is close to the lower limit set by the control system and it stops running until it reaches the set upper pressure limit. When the water is heated in the system, the temperature rises and the volume expands, the pressure of gas chamber is extruded and the system pressure increases, the water in the system flows to the expander (or softening tank) through the safety pressure relief device until the system pressure reaches the limit value and the pressure relief stops until the system pressure decreases to the set value.

Scope of application
1. Continuous heating supply system with high temperature water:
2. Industry and civilian continuous heating system of hot water station:
3. Hot water and high temperature water circulation operating system;
4. Hot and cold water system of fan coil.

Performance characteristics
The small size pressure-stabilizing expander unit as a special technical device is able to set the expansion part and gas pressure stabilizing part separately, so that the most expansion capacity of the system can be stored in isolated expander and the volume utilization can be up to 90%, therefore, the whole volume and height is smaller, saving 50% -60% of land and facilitating the arrangement and installation of equipment and also saving the civil engineering cost of the machine room.


It is safe and simultaneous advanced automatic control system. It has double pumps for both alternating running and simultaneous running. It has functions of a low water level protection and anti-pressure instability, etc. Which could ensure sketch the safe and stable operation of the device.

Angle Valve

An angle valve has an inlet and an outlet port which are perpendicular to each other. It is sorted as the manual valves and it is usually used to prevent or control the flow of a liquid in a pipe and this is the reason for it is sometimes called simply as stop valve. Angle valves are the most common-in-use valves that we see everyday around.Please contact us!

Angle Valve,Angle Valve Splitter,Angle Valve Toilet,Angle Valve Tool

Kaiping Zhanyu Hardware Factory , https://www.bodtonfaucet.com