The voltage can be set up and down with a precise variable voltage supply. Normally connected relay leads are not connected to the 15V dc supply, which prevents voltage from being passed to the battery leads. This allows the upper and lower voltages to be accurately set. However, a 15 V dc charging source is connected to the circuit.
First, the variable voltage power supply is fixed at 13.3 V dc-- voltage of the battery which is fully charged, the battery and is connected to the connection point of the circuit. The slider of the VR1 is adjusted to the top of the positive pole of the battery . The slider of the VR2 should be adjusted to the end connected to the VR1. The transistor starts to work and shunts VR1. Then, the slider of VR1 is adjusted to the other end, that is, to one end of VR2.
Now set the test supply voltage to 11.8 V dc, which is the voltage when the battery is depleted. Then, adjust VR2 so that it stops the transistor from working. The test voltage is then increased to 13.3 V dc and VR1 is adjusted to operate the transistor. With the set up and down voltage, the NC point is connected to the circuit (15V dc charging voltage). The battery charger is now ready.
This is our skin pack vacuum machine, which can be used to pack meat, fish, seafood, cooked food, etc.
Configuration
1. 304 stainless steel body and housing.
2. High quality aluminum 6061 anodized.
3. Vacuum pump.
4. Teflon sealing hot plate.
5. Omron temperature controller.
6. Schneider and Chint electric switches.
Technical features
1. One press is enough and the operation is simple.
2. No special mold is required, and the general profile is high.
3. Imported temperature control, energy saving and low consumption.
4. Corrosion resistance, no mucous membrane and easy to clean.
5. The pressure is adjustable and the vacuum effect is good.
Skin Pack Vacuum Machine,Skin Packaging Machine For Food,Vacuum Skin Pack Machine,Multivac Skin Pack Machine
Hangzhou Jingyi E-commerce Co.,Ltd , https://www.jypackmfg.com