Beijing Changping was under construction and sculpture collapsed and buried 20 people and caused 3 dead and 6 injuries.

Beijing Changping I was building a sculpture collapsed and buried 20 people causing 3 dead and 6 injured diesel generators | diesel generator prices / 2012-07-11

At 2 o'clock in the afternoon yesterday, a giant relief that was being produced collapsed in the Beijing Clay Sculpture Art Development Institute in Xianrendong Village, Shisanling Town, Changping District. The embossed fell over the scaffolding immediately and the 20 workers working on the scaffold were buried. First aid, firefighting and other departments rushed to the scene to start the rescue. The accident caused three deaths and six injuries. At present, the cause of the accident is under further investigation.
It is understood that the incident building is located in a village in the mountains, the plant is a color steel plate structure. At the time of the incident, 20 workers were working on scaffolds to create a curved statue that was 10 meters long and nearly 30 meters wide. In the instant that the relief collapsed, the scaffolding was overwhelmed, and several workers were trapped in the clay tile on the spot.
A villager recalled that he was resting at home during the incident. Suddenly he heard a loud noise. The whole room shook up. He thought it was an earthquake. He ran out from the house and saw it. The factory building was not far from the dust. Flying, and many people ran out of the hospital. Until the ambulance arrived at the scene, everyone knew that the relief in the factory had collapsed.
According to an injured worker, the main structure of the collapsed relief was a steel bar with a large plank attached to the steel. When the relief was made, the workers would first inject a large amount of mud into the wood, and before the relief collapsed, the process of pouring the mud was nearing completion. The mud on the relief is very large, about 40 cubic meters. The relief came crashing down, leaving workers on scaffolds off guard. Scaffolding was as high as 10 meters. The 20 workers on the shelf had no room to evacuate. Then the scaffold was crushed by heavy reliefs. At that time, most of the people on the shelf were buried directly in the mud. Even more serious, there were people. Steel rods in scaffolding.
After the incident, 6 ambulances and 10 fire engines arrived at the scene the first time to search and rescue the trapped people. During the search and rescue process, two workers were found to have no vital signs. Injured workers were sent to Changping District Hospital for treatment for the first time. As of 5 pm, trapped people were all found. According to statistics, about 20 workers are sent to the hospital. Those who have suffered minor injuries, after treatment, left the hospital on their own in the evening.
Yesterday, Changping District Government official microblogging released the news that as of 6:30 pm rescue ended, the rescued 20 people were all sent to the 999 emergency center and Changping District Hospital for treatment, 3 of whom died due to severe injuries. Six people were treated in hospitals and no life-threatening conditions were left. The rest of the patients were discharged one after another.
Next:Installation, use and regulation of marine diesel generator sets
Prev:Inner Mongolia is committed to strengthening the Great Wall of the past to protect the public awareness

430 Stainless Steel Cut Wire Shot

Stainless Steel Cut Wire Shot is a very important Metal Abrasive.It is often utilized in wheel blasting processes when ferrous contamination of work piece is forbidden. When Blasting stainless work pieces or other metals need to be down as a pristine surface, stainless cut wire may be a very good metal abrasive to take into consideration. Stainless Steel Cut Wire Shot As Conditioned is usually used for shot peening processes on stainless steel or Inconel parts. Stainless steel cut wire can range in size from 0.15mm up to 3.0mm and possibly larger in special order circumstances.

Concerning stainless steel cut wire shot, it has a very bright surface, maintains its shape longer then cast abrasives and it has a dust free surface. Stainless Steel Cut Wire is available as cut or conditioned and with various chemical compositions.The bulk density of stainless steel cut wire shot is very high and must be taken into consideration in relation to its use in equipment. Suitable equipment must be selected to convey Stainless Steel Shot.


430 Stainless Steel Cut Wire Shot,Sus430Stainless Steel Cut Wire Shot,Ss430 Stainless Steel Shot,Astm430 Stainless Steel Cut Wire Shot

Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com