In the process of industrial oxygen supply, the oxygen delivery pipeline must be equipped with a corresponding flow measurement system. Due to the need to economically calculate and collect fees, the measurement accuracy of oxygen flow has attracted more and more attention.
In the past, most orifice plates were used to measure oxygen flow, and an appropriate intelligent flow meter was used to automatically compensate for errors caused by oxygen pressure and temperature changes to improve the measurement accuracy. The orifice plate has a simple structure and is widely adaptable to fluids and has been standardized. However, in practical applications, it sometimes results in errors that are difficult to estimate. The key is to detect a part at one time.
As we all know, the traditional orifice plate throttling device has the disadvantage that it is difficult to overcome: the range ratio is too small, usually only 3:1, so that the large flow can not be taken into account, the small flow rate is often not measured, resulting in a large error in the cumulative flow value; Secondly, the orifice plate throttling device has a large pressure loss, which is not conducive to energy saving, and has a large amount of construction and high installation costs.
Hex Bore Bearings/Farm Bearings:
Hex Bore bearings are also named Hex Bore Agricultural Bearings, this
series features a Hex bore. Used in apllications where Collars, Set
Screws or any other looking devicesare not rquired. This series
incorporates Borine's TRASH SEAL, a close fitting metal shield backed by
a moilded rubble seal. Also available relubricable-prefix "G". Borine'
Hex Bore bearings are basis on good quality and competitive prices,
Widely used for John Deere, IHC, Great Plains, Kinze, KMC, Lilliston,
White, Orthman, New Holland, AMCO many application.
Hex Bore Bearings,Ag Bearings,Hex Bore Agricultural Bearing,Farm Bearings
Ningbo Borine Machinery Co.,Ltd. , http://www.borine-agroparts.com