6 systems for garbage truck maintenance

    1. When the cooling system changes seasons in winter, it is necessary to clean and maintain the garbage truck. After the garbage truck runs normally for six to eight months, it must be cleaned once. If the temperature is too high or leaks, it must be cleaned. Prevent corrosion, leakage of seals and water tanks, and replacement of old coolant.


    2. The gearbox usually travels 800 to 1000 kilometers per garbage truck and needs to clean the gearbox. If the garbage truck's transmission slips, the temperature is too high, the shift is slow, and leakage occurs, it should be cleaned and maintained. Clean up oil and impurities to maintain normal elasticity of seals and o-rings, increase power output, and replace old transmission oil.


    3. The brake system garbage truck needs to be cleaned and maintained every 800 kilometers. Clean up the harmful substances inside the system, avoid system instability due to temperature instability, prevent brake fluid deterioration, and replace them in time.


    4. Lubrication System The lubrication system plays a role in lubricating the various components of the garbage truck, avoiding excessive wear and causing premature aging. Under normal circumstances, garbage trucks must be cleaned every 5,000 to 10,000 kilometers. If there are excessive noises in the engine of the garbage truck, the power is insufficient. When the water temperature is too high, it must be cleaned and maintained. Usually pay attention to the internal cleaning of the engine oil and debris to prevent engine parts wear, thereby increasing its working efficiency and increase the service life.


    5. Fuel system Under normal circumstances, when the garbage truck travels 800 to 1000 kilometers, it is necessary to clean and maintain its fuel system. If the engine is in a state of shock or acceleration, and there is insufficient power or fuel consumption, it must be cleaned and maintained. Clean up dirt and carbon deposits inside the system to reduce wear and keep the engine in good working condition.


    6, the power system garbage truck driving every 1000 to 2000 kilometers, it is necessary to clean and maintain its power system. If there is leakage in the steering system of the garbage truck, the accessories of the power steering machine must be replaced to clean the internal impurities. If noise occurs, the brake fluid must be replaced.

    SHING RAY Sewing Machine Thread Tension

    Thread Tension Asm For Shingray ,Shingray Fw787 Sewing Machine,Shingray Fw787 Sewing Machine Parts ,Shing Ray Sewing Machine Thread Tension

    sewshimano , https://www.nb-fzysewing.com

    Previous Post: Trap selection of important factors
    Next Post: The future direction of the recorder
    Home
    Recent Posts
    • Case Study of Multiple Tests Using the IT6900A D…
    • Relationship between spectral components and pla…
    • The technical requirements of domestic engineeri…
    • Auto market slows down, international auto giant…
    • Freeze-drying equipment should develop towards t…
    • Wang Dianzhen: The future of the LED industry is…
    • Collapsible Metal Wire Mesh Roll Container for W…
    • FAW Jiefang Heavy Vehicle Leads to Win in Qualit…
    • Ihg Cleaning Pump 12V Sewage Pump Pipe Pressure …
    • Ship plate: to go to capacity to "sail and …
    • The fourth request from the country begins. Cumm…
    • The development of RFID technology needs to brea…
    • The LED lighting market has set off a rapid repl…
    • Shandong Rongcheng Three Batches of Tires Export…
    • Michelin officially pushes third-generation wint…
    • AC Dynamo Electric Brushless Stamford Generator …
    • Turbocharged performance in China is flat
    • 200 million yuan in Qingdao Haixi heavy machine
    • The advantages of intelligent LED lighting will …
    • Beijing Green Lighting Energy Conservation Actio…