3000mm Automatic Chain Link Fence Making Machine (Manufacturer)

I. Description
Illustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.



Advantages:
1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Schneider inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min

II.Technical ParameterIII.Diameter of Wire Mesh opening size IV.Commercial terms
1. FOB CIF CFR all available
2. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
3. Minimum order quantity: 1 set
4. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port, China.
8. Installation: we could arrange our engineer install the machine in our factory.

V.Contact Information

 
 
 
 

Elevator Door Operator , Center Opening Door Machine

Permanent magnet variable frequency and voltage regulation control
Corresponding to center opening landing door device
Operating voltage AC 220V
Asynchronous door vane, synchronous belt drive
Optional mounting: mounted on straight beam or top of the car
Fully digitized closed-loop control
Center opening door machine

Elevator Door Operator

Elevator Door Operator, Lift Door Operator, Elevator Car Door Operator

Ningbo Xinda Elevator Traction Technology Co., Ltd. , https://www.xinda-elevator.com