300 Degree High Temperature Oil Heating Mold Temperature Controller Boiler

High-temperature oil mold temperature controller

(oil heater) 
 

Feature:

*Anti-explosive device pipe

*Blowing return function (optional)

*Back to the oil temperature indicator

*Power automatic exhaust function of heating power switching

*Negative pressure system operation (optional)

*Heat the oil BY-PASS relief loop

*Instant cooling power function

*Multi-point temperature control unit can be customized

*Pump horsepower and heating power can be customized

*Electric with OMRON,FUJI,TE,LG,Schneider, Siemens

*Temperature control range: max.temperature 300ºC

*304 stainless steel pipeline to reduce the tube group and rust

*Isolated electrical control box, to extend the useful life of electrical appliances

*RS485 communication function, automated management (optional)

*Control: imported microcomputer or PLC control (optional)

*Perfect safety protection. fault display, repair and maintenance without professionals

 

Standard specifications,some special specifications can be customized.

Working principle:

The oil temperature machine is based on oil as a medium of heat transfer of mold temperature machine. The oil temperature machine has an oil storage tank. It is an cycle that heat conduction oil from oil storage tank into the system at work by the circulation pump into the mold or other need to temperature control equipment. And then the heat conduction oil from the temperature control equipment will returns to the system again. When the temperature is lower than the set value, the heater began to work, when the temperature after reaching the set value, and stop working.  In the process, if the oil temperature is too high, the system will activate the solenoid value to let cooling water cool down the temperature directly until the water is down to the system requirement. If the temperature keeps increasing and reach to the set point of EGO, system will sound high pressure alarm and stop operation. if oil pressure falls down below the set point the system will send a signal of low level alarm and stop working.

Packing and shipping:

â—‹ Packing
1. Dust Proof Film + Anti-collision Foam + 5 Layer Cartons + Ply-wooded Case (For LCL only, no need fumigation). 
2. Customized packing is available.
3. We are always working hard on the most reliable packing in order to help you get the Perfect products.
â—‹ Shipping

1. Express delivery

2. Air flight

3. Sea shipment

4. Railway transportation



Trade shows:

Plast Eurasia Turkey & Arab Plast, Dubai, UAE



Company information:

NANJING BUYING INDUSTRIAL EQUIPMENT CO.,LTD is specialized in R&D, manufacturing, sales and service for industrial plastic molding auxiliary equipment and industrial refrigeration equipment.

To meet the social development demands, BUYING is making every efforts to develop a new generation of products, which is power saving, environment protecting, safer and reliable. Not only the appearance is beautiful, but also it is economic and durable.

BUYING dedicated to improve industry working efficiency and product quality, to create much more profits for every customer, to reach a win-win result.

Our service:

For new and old import and export customer supply:

1.A professional sales team,experienced engineers, advanced manufacturing equipment,particular production technology;BUYING strictly implements ISO9001 Standard in all pretation;Pass SGS and CE quality guarantee system keep and assure customer products and delivery time.

2.Supply specialized installation guidance and after services that anytime and any country if customer need.

3.Reply your inquires within 24 hours anytime and anywhere.

Customer need is the most important;Customer benefit is our benefit;Our grow from company credit and working duty for our new and old customers.

Application:
The oil temperature machine is suitable for the auxiliary production engineering plastic material, plastic products. The oil temperature machine first preset to the temperature needed for injection mold, a lot of time for the high quality product, reduce the raw material test. Mold temperature machine accurately to reduce waste, the quality and production, is an indispensable tool in injection molding industry. It is mainly applied to heating up and temperature maintenance of mold. It also can be applied to other fields with the same demands. High temperature oil from the mould is returned to the cooler for indirect cooling. Then the oil will be sent to the mold after being pressurized by pump and heater pipe, which realizes heating and temperature maintenance of the oil. In addition it can ensure stable temperature control with the type of controller.



Certifications:



FAQ:

1. What makes you different with others?

1) Our Excellent Service
For a quick, no hassle quote just send email to us.

We promise to reply with a price within 24 hours - sometimes even within thehour.

2)Our quick manufacturing time
For Normal orders, we will promise to produce within 15-20 working days.

We can ensure the delivery time according to the formal contract

2. May I know the status of my order?

Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time.

3.Can I use our own brand logo on the products?
Yes. We provide OEM/ODM service to our customers. Our professional engineershaving rich experience in heat pump design and manufacture.Just tell us yourideas or provide the drawing, we can help you to carry out your ideas. 
4.What is your terms of delivery?
We accept FOB, CFR, CIF, EXW etc.You can choose the one which is the most convenient or cost effective for you.
5. What is your payment terms?
1) T/T 40% deposit, T/T balance 60% paid before shipment;

2) T/T 40% deposit, balance 60% paid through irrevocable L/C at sight;

3) Other payment terms are negotiable.
6. What about warranty?

One year, all spare and accessory parts of products will be free.

300 degree High Temperature oil heating mold temperature controller
 

 

Outport Stopper For I.V Fluid Bag

The outport stopper for I.V fluid bag is based on the polycarbonate joint formed by injection molding process, comprising of the injection‐purpose halogenated butyl rubber stopper and aluminum‐plastic composite cap. Among which, the material for polycarbonate joint is the imported medical‐level polycarbonate, complying with the FDA rules; the aluminum‐plastic composite cap is produced by using the imported top‐quality aluminum strip; the injection‐purpose halogenated butyl rubber stopper can be chosen to use the well‐known domestic product or imported product on the request of user.

The infusion stopper is produced in the clean plant, with the partial part reaching to Class 100 under the Class 10,000 background. The main working procedures, such as the injection molding and the cleaning, riveting, inspection, wash, assembly and etc., are designed and processed as per the cleanliness requirements at the partial level of Class 100, which passes the GMP on‐site certification and complies with the cleanliness requirements of high capacity injection medicine.

The main production equipments, test and inspection instruments of infusion stopper have already reached to the international level and are advanced at home. Meanwhile, the full production process is conducted the strict control and management, and making product free of plasticizing agent, loading agent and lubricating agent, and free of absorption or transfer when contacting with liquid medicine, neither the pyrogen and soluble matter, thence such equipment may ensure the product quality.

The outport stopper for I.V fluid bag is mainly used for double‐hose non‐PVC software bag.

Stopper For I.V Bag,Stopper For Plastic Infusion Bag,I.V Fluid Bag Stopper,I.V Fluid Bag Outport Stopper

YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com